Hyd-S

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ARW SERIES - DCW SERIES
  
  There is a capacity range from 5 kW to 2064 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- ER.FCV SERIES - ER.FCF SERIES
  
  There is a capacity range from 88 kW to 1770 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us

Eraco Chiller

HYD-S series products specially configured for HVAC market within the hybrid devices produced in Eraco facilities transfer the required coolant to the system by passing it through a dry-cooler or chiller circuit. It has the number of compressors and horsepower based on the capacity requirement. HYD-S series products with multiple compressor structure prevent the system from stopping completely in possible cases of failure. Thanks to the energy saving it provides, it depreciates the investment made in a short time and thus reduces the operating cost. All required working operations are managed sensitively by the “freecooling kit” in the device, leaving no need for any user intervention.