Er.fcv Serıes - Products | Chiller Su Soğutma Sistemleri

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ARW SERIES - DCW SERIES
  
  There is a capacity range from 5 kW to 2064 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- ER.FCV SERIES - ER.FCF SERIES
  
  There is a capacity range from 88 kW to 1770 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us

Eraco Chiller

ER.FCV SERIES

ER.FCV Series Horizontal Type Dry Cooler

155kW – 1770kW

High Performance Dry Coolers

Dry Coolers are used to cool the ambient air and process water. High performance dry coolers are manufactured from aluminum tube aluminum fins with wavy surfaces that increase the heat transfer coefficient in accordance with horizontal or vertical air flow. Dry Coolers, which have a structure suitable for parallel connection, can easily increase capacity by connecting an ER.FCV series device when cooling capacity is to be increased in the plant.

V type design
Cassette material is epoxy polyester based electrostatic powder coated galvanized steel that provides UV and corrosion protection.
There are intervention covers for cleaning in each fan compartment.
It is tested at 20 Bar pressure.
Compliance with IP54 standards suitable for outdoor environment.
It can operate at outdoor temperatures up to +60°C.
Long-lasting operation is guaranteed with the use of materials suitable for corrosive environments.
Contamination and calcification is prevented thanks to closed circuit operating system.
Microprocessor controls the stepped sequential operating principle of the fans depending on the outdoor temperature as well as the desired water temperature.
There is an Error (ER) coded warning and alarm system.