ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
There is a capacity range from 3.5 kW to 1970 kW according to your needs.
ENE-S SERIES, ENE-D SERIES
There is a capacity range from 194 kW to 1830 kW according to your needs.
Provides Precise Temperature Control on Plastic Extruder Film Surface
ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
Increase in movie quality Up to 30% increase in film production Increase in film transparency and gloss
It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits.
Flow rate is compatible with measurement principles.
With the level indicator cone, the desired flow rate can be adjusted for each chamber.
Cycle/flow rate: 0/10 lt/min Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses Water inlet-outlet size: ¾”
HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
There is a capacity range from 9 kW to 1700 kW according to your needs.
HEW SERIES - RCW SERIES
There is a capacity range from 61kW to 2148kW according to your needs.
