Lta Serıes - Products | Chiller Su Soğutma Sistemleri

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us

Eraco Chiller

LTA SERIES

LTA-S/T Tandem Scroll Compressor

6,9 kW - 316,3 kW

LTA-S/T series air cooled, package type chiller devices are; units manufactured with two
scroll type compressors. Thanks to its wide capacity range, it is able to provide solutions for
nearly every need where temperatures of -5 °C and below are required.The compressors are
actuated in stages according to the capacity need.

• Cooling capacity is referred to -2°C water outlet and +25°C ambient
temperature.
• Ses seviye basıncı açık alanda cihazdan 10 metre uzakta 4 taraftan
alınan ortalama değerler ile ölçülmüştür.
• Pump specificaitons are subject to change depending on number of
machines piping lenght and height.
• Water pump flow rate is obtained from manufacturer’s technical data
sheet.