Si̇ngle Pump And Water Tank - Products | Chiller Su Soğutma Sistemleri

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us
- Email to CEO
- Would you like to be our supplier?

Eraco Chiller

Single Pump and Water Tank

Forms External Hydraulic Units for Processes Requiring Non-Standard Water
Volume or Circulation Pump

As Eraco Cooling, external hydraulic units are created for processes that require a non-standard water volume or circulation pump in addition to packed type (water tank and circulation pump integrated in the device) devices. Circulation pump with the pressure and flow required by the process and water tank with desired volume and technical features are mounted on a single chassis. Water tanks in these units, where aesthetic design and ergonomics are taken as basis, are made of stainless steel and covered with insulation material with a heat transmission coefficient of 0.032(O°C) λ (W/m.K). Components such as cover design, inlet-outlet sleeves and water level indicator are clarified according to the project details.