Hea-Cc Seri̇

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ARW SERIES - DCW SERIES
  
  There is a capacity range from 5 kW to 2064 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- ER.FCV SERIES - ER.FCF SERIES
  
  There is a capacity range from 88 kW to 1770 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us

Eraco Chiller

HEA-CC CONDENSERLESS CHİLLER

9.1 kW - 1544,4 kW

It is a scroll compressor version for air conditioning processes of the preferred condenser-
free chiller application in cold areas. The HEA-CC series units produced with reasonable
price, minimal design, high efficiency and comfortable service advantages are shipped in
R410A gas charged. High efficiency Shell & Tube evaporators integrated into the device can
be designed at the plate type according to the field requirements. Regardless of the caustic
structure of the condenser-free structure, it can be used in indoor applications, so that the
use of unnecessary antifreeze is also prevented.

• Cooling capacity is referred to +7°C water outlet and +35°C ambient
temperature.
• In an open field at 10 m from the unit four side unit avarage value.
• Pump specificationa are subject to change depending on number of
machines, piping length and height.
• Water pump