Rca-Cc Seri̇e

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us
- Email to CEO
- Would you like to be our supplier?

Eraco Chiller

RCA-CC CONDENSERLESS CHILLER WITH SEMI HERMETIK SCREW

150 kW - 1283,4 kW

RCA-CC series units with screw compressors are R134a gas charged condenser-free products. Thanks to its large capacity range, it is compatible with all HVAC projects projected with screw compressor. The integrated Shell & Tube type evaporator into the device can be designed as plates according to the need. The RCA-CC series products produced with the known and proved components in the field are among the first preferences of the project and application companies.

• Cooling capacity is referred to +7°C water outlet and +50°C condensing
temperature.
• In an open field at 10 m from the unit four side unit avarage value.
• Pump specificationa are subject to change depending on number of
machines, piping length and height.
• Water pump flow rate is obtained from manufacturer’s technical data
sheet.